Your fireplace glass plays a critical role in both safety and efficiency. Whether it’s cracked, fogged, or simply outdated, replacing it is easier than you think. In this guide, we’ll walk you through how to measure and replace your fireplace glass to ensure a perfect fit every time.
Why Proper Measurement Matters
Getting the right measurements ensures that your new ceramic fireplace glass will fit snugly, prevent heat loss, and protect your home from sparks. Ordering incorrectly sized glass could result in gaps, improper sealing, or potential safety hazards.
Step 1: Gather Your Tools
Before starting, you’ll need:
- A tape measure (preferably one with 1/16-inch increments).
- A notepad and pen to write down your measurements.
- Protective gloves (especially if dealing with broken glass).
- A screwdriver (if your fireplace has a retaining frame).
Step 2: Remove the Old Glass
Follow these steps to safely remove the old glass:
- Make sure your fireplace is completely cool before starting.
- If the glass is held by screws or clips, carefully remove them using a screwdriver.
- Gently lift out the glass panel. If it’s broken, wear gloves and handle with care.
- Clean the gasket seal and surrounding area to prepare for the new glass.
Step 3: Measure the Fireplace Glass
Accurate measurements are crucial. Here’s how to do it correctly:
- Measure width (left to right) – Take three measurements: top, middle, and bottom. Use the smallest measurement.
- Measure height (top to bottom) – Take three measurements from left, center, and right. Again, use the smallest number.
- Subtract 1/8 inch from each measurement to ensure a proper fit inside the frame.
- Determine the thickness (typically 3/16” or 1/4” for ceramic fireplace glass).
Step 4: Order the Right Replacement Glass
Now that you have the exact measurements, you can order custom-cut ceramic fireplace glass. Make sure to choose:
- Robax or NeoCeram glass (designed for high temperatures).
- The correct thickness and size.
- Gasket & glue kits for proper sealing.
Need a custom order and you're not sure what to do? Give us a call at (905) 577-3901.
Step 5: Install Your New Fireplace Glass
Once your new glass arrives, follow these steps to install it:
- Place the new gasket seal around the edges of the fireplace opening.
- Position the new glass inside the frame, ensuring a snug fit.
- Secure it using retaining screws or clips (avoid overtightening).
- Double-check the fit and test the door seal before lighting your fire.
Enjoy a Clear, Safe Fireplace Experience
Replacing your fireplace glass not only improves safety but also enhances the beauty of your fire view. With custom ceramic glass, you’ll enjoy a crystal-clear look at the flames without the hassle of fogging or staining.
Need high-quality replacement glass? Order custom fireplace glass today and upgrade your fireplace with confidence!